PLANET Industrial 1-Port 10/100/1000T 802.3bt PoE++ to 4-Port 802.3at PoE+ Wall-mounted Extender

Κατασκευαστής: PLANET PLANET

Κωδικός Προϊόντος: WGS-E304PT

Επιθυμητό Σύγκριση

PoE Solution for Long-reach Distance

PLANET WGS-E304PT is an industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender designed especially for the point to multipoint PoE application. The WGS-E304PT can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ input port and supplies a maximum of 70-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 250m where up to 4 powered devices (PDs) can be powered at the same time. The WGS-E304PT provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Environmentally-hardened Design

With industrial-grade IP30 metal case, the WGS-E304PT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the WGS-E304PT can be placed in almost any difficult environment.

DIP Switch for Operation Mode Selection

The WGS-E304PT offers “Standard”, “VLAN” or “Extend” mode. The WGS-E304PT operates as a normal Gigabit Ethernet Switch in the "Standard" operation mode.

The "VLAN" operation mode features port-based VLAN function that can help to prevent the connected clients’ multicast or broadcast storm from influencing each other.

In the "Extend" operation mode, the WGS-E304PT operates on a per-port basis at 10Mbps duplex operation but can transmit data over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the WGS-E304PT provides an additional solution for distance extension, thus saving the cost of Ethernet cable installation.

DIP Switch Mode	Function
Standard (default)	This mode makes the WGS-E304PT operate as a general switch and all ports operate at 10/100/1000Mbps auto-negotiation.
VLAN	This mode makes the WGS-E304PT operate as a VLAN isolation switch and Port 1 to port 4 will isolate respectively. Port 1 to port 4 can only communicate with port 5 (uplink port).
Extend	This mode makes the WGS-E304PT operate as a distance extension switch and port 1 to port 4 can only transmit distance of 250m at speed of 10Mbps.

Innovative Wall-mount Installation

The WGS-E304PT is specially designed to be installed in a narrow environment, such as wall enclosure. The compact, flat and wall-mounted design fits easily in any space-limited location. It adopts the user-friendly “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance of the WGS-E304PT placed in an enclosure very convenient for technicians. The WGS-E304PT can be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making its usability more flexible.

Plug and Play, Easy Cabling Installation

The WGS-E304PT can be easily installed by way of Plug and Play. It is used between a power source equipment (PSE) and the PD. The WGS-E304PT injects power to the PD without affecting the data transmission performance. The WGS-E304PT offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 250 meters. The WGS-E304PT is designed in a compact box containing 5 RJ45 ports, of which 1 "PoE IN" port functions as PoE (Data and Power) input and 4 "PoE OUT" ports on the other side functions as PoE (Data and Power) output. The "PoE OUT" port is also the power injector where DC voltage is transmitted over Cat. 5/5e/6 cable, and data and power are simultaneously transferred between the PSE and PD.

Specifications

Hardware Specifications
Network Connector	PoE In Port 　1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in 　Auto MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port 　4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out 　Auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture	Store-and-Forward switch architecture
MAC Address Table	2K MAC address table with auto learning function
Switch Fabric	10Gbps
Switch Throughput	7.44Mpps @ 64Bytes
Flow Control	IEEE 802.3x pause frame for full duplex Back pressure for half duplex
Jumbo Frame	9Kbytes
ESD Protection Air 8KV DC	Contact 6KV DC
Surge Protection	6KV
Enclosure	IP30 metal case
Installation	DIN-rail kit and wall-mount ear
Dimensions (W x D x H)	148 x 24.2 x 134 mm
Weignt	457g
LED	PoE Input Port (Port 5): 　LNK/ACT(Green) 　PoE: Power-in-use (Amber) PoE Output Ports (Ports 1~4): 　LNK/ACT(Green) 　PoE: Power-in-use (Amber)
DIP Switch	Multi-operation mode options (Standard/VLAN/Extend) selection
Power Consumption	8.6 watts/29 BTU (Power On) 82 watts/279 BTU (Full loading with PoE function)
Power over Ethernet
PoE Standard	PoE in Port 　IEEE 802.3bt PoE++ Type 4 standard PD 　IEEE 802.3at PoE+ end-span/mid-span PD Per PoE out Port 　IEEE 802.3at Power over Ethernet Plus end-span PSE
PoE Power	PoE in Port 　50~57V DC, max. 95 watts Per PoE out Port 　44~55V DC, max. 30.8 watts
Power Pin Assignment	PoE in Port 　1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-) Per PoE out Port 　1/2(+), 3/6(-)
PoE Power Budget	60-75 watts (max.) @ 802.3bt PoE++ Type 4 input
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC60068-2-32 free fall IEC60068-2-27 shock IEC60068-2-6 vibration
Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Operating	Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage	Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing)