802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience.
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance than a typical Wave 1 AP.
Low-Profile Mounting: The UniFi nanoHD AP's low-profile ceiling mount (sold separately) allows you to seamlessly integrate the AP into its environment.
|Dimensions||160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")|
|Weight||300 g (10.6 oz)|
|Weight With Mounting Kits||830 g (1.83 lb)|
|Networking Interface||(1) 10/100/1000 Ethernet Port|
|Power Method||802.3af PoE|
|Power Supply||UniFi Switch (PoE)|
|Maximum Power Consumption||10.5W|
|Supported Voltage Range||44 to 57VDC|
|TX Power||2.4 GHz: 23 dBm
5 GHz: 26 dBm
|MIMO||2.4 GHz: 2x2
5 GHz: 4x4
|Radio rates||2.4 GHz: 300 Mbps
5 GHz: 1733 Mbps
|Antennas||2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each
5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each
|Wi-Fi Standards||802.11 a/b/g/n/ac/ac-wave2|
|Wireless Security||WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
|BSSID||8 per Radio|
|Mounting||Wall/Ceiling (Kits Included)|
|Operating Temperature||-10 to 70° C (14 to 158° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Certifications||CE, FCC, IC|
|Advanced Traffic Management|
|Advanced QoS||Per-User Rate Limiting|
|Guest Traffic Isolation||Supported|
|WMM||Voice, Video, Best Effort, and Background|
|Supported Data Rates (Mbps)|
|802.11a||6, 9, 12, 18, 24, 36, 48, 54 Mbps|
|802.11n||6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)|
|802.11ac||6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)|
|802.11b||1, 2, 5.5, 11 Mbps|
|802.11g||6, 9, 12, 18, 24, 36, 48, 54 Mbps|