Τα καλάθι αγορών σας είναι άδειο!
Συνδεθείτε ή δημιουργήστε έναν λογαριασμό.
 CND-300x300.jpg "1111")
 csb-300x300.jpg "1111")
 engenius-300x300.jpg "1111")
 planet-300x300.jpg "1111")
 powerwalker-300x300.jpg "1111")
 pulsar-300x300.jpg "1111")
Indoor/outdoor, 4x4 WiFi 6 access point designed for mesh applications.
The Access Point WiFi 6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that provides best-in-class signal meshing to enhance the wireless coverage of home and enterprise networks. The U6 Mesh can reach an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MIMO) bands. This access point also operates at full 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. The sleek U6 Mesh is discreet enough to stage anywhere in your home or office, but also rugged enough to reliably operate outdoors thanks to its IPX5-rated, waterproof housing. The U6 Mesh is a plug-and-play device designed to easily extend your wireless signal to ensure full, seamless coverage and high-quality WiFi connectivity. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Mechanical |
|
| Dimensions | ∅ 48.5 x 159.5 mm (∅ 1.91 x 6.28") |
| Weight | Without Mount: 400 g (0.88 lb) |
| Enclosure Material | Plastic, aluminum |
| Mounting Material | Plastic |
| Weatherproofing | IPX5 |
Hardware |
|
| Management interfaces | Ethernet Bluetooth |
| Networking interface | GbE RJ45 port |
| Button | Factory reset |
| LED* | White/blue *Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes. |
| Power method | 802.3af PoE |
| Power supply | UniFi PoE switch 48V, 0.32A PoE adapter (included) |
| Supported voltage range | 44 to 57VDC |
| Max. power consumption | 11.4W |
| Max. TX power | 2.4 GHz 22 dBm 5 GHz 26 dBm |
| MIMO | 2.4 GHz 2 x 2 (UL MU-MIMO) 5 GHz 4 x 4 (DL/UL MU-MIMO) |
| Throughput rate | 2.4 GHz 573.5 Mbps 5 GHz 4.8 Gbps |
| Antenna gain | 2.4 GHz 3 dBi 5 GHz 5 dBi |
| Mounting | Wall, desktop, pole mount (included) Ceiling mount (optional) |
| Operating temperature | -30 to 60° C (-22 to 140° F) |
| Operating humidity | 5 - 95% noncondensing |
| Certification | CE, FCC, IC |
Software |
|
| Wi-Fi Standards | 802.11a/b/g Wi-Fi 4/Wi-Fi 5/Wi-Fi 6 |
| Wireless Security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) |
| BSSID | 8 per Radio |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Trafc Isolation | Supported |
| Concurrent Clients | 300+ |
| Zero wait DFS | Yes* *Supported with upcoming firmware versions |
Supported Data Rates (Mbps) |
|
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n (Wi-Fi 4) | 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11ac (Wi-Fi 5) | 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) |
| 802.11ax (Wi-Fi 6) | 7.3 Mbps to 2.4 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) |
