PLANET GUP-805A-95W 100/1000BASE-X SFP to 10/100/1000BASE-T 802.3bt PoE++ Media Converter (95 Watts)

Κωδικός Προϊόντος: GUP-805A-95W

Επιθυμητό Σύγκριση

802.3bt PoE++ 95-watt Power over 4-pair UTP Solution

As PLANET GUP-805A-95W adopts the IEEE 802.bt PoE++ standard technology, it is capable to source up to 95 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant powered device (PD). Its power capability is three times more than that of the conventional 802.3at PoE+ and it is an ideal solution for those high power consuming network PDs, such as:

PoE PTZ speed dome cameras
Network devices
Thin clients
AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks
Remote digital signage displays
PoE lightings

With a total power budget of up to 95 watts for different kinds of PoE applications, the GUP-805A-95W provide a quick, safe and higher 802.3bt PoE++ network solution for small businesses and enterprises.

Model	PoE Standard	PoE Budget	LAN Port Speed	SFP Slot Speed
GUP-805A-95W	IEEE 802.3af/at/bt	95 watts	10M/100M/1000Mbps	100M/1000BASE-X

High Performance and Steady Network Communications Guaranteed Despite Distance Extension

The GUP-805A-95W extends communication distance with high Gigabit performance via SFP slot and SFP transceiver. The GUP-805A-95W provides media conversion between 10/100/1000BASE-T and 100/1000BASE-X interfaces for various fiber optic applications. The available SFP LC fiber interfaces are shown below:

Optic Mode	Connector Type	Distance
Multi-mode	Duplex LC	220m/550m/2km
Single mode	Duplex LC	20/40/60/80/120km
Single mode WDM	Simplex LC	2/10/20/40/80/120km

802.3bt PoE++ and DIP Switch for PoE Power Output Mode Options

To meet the demand of various powered devices consuming stable PoE power, the GUP-805A-95W provide one DIP switch for multi-PoE operation modes that include 95-watt 802.3bt type-4 PoE++ mode, UPOE and legacy mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.

802.3bt PoE++ Power Output Mode
UPOE Power Output Mode
Legacy Power Output Mode

PoE Mode	Function
BT	This mode fully supports IEEE 802.3af/at/bt standards.
UPOE	This mode fully supports Cisco UPoE standards or PoH standards.
Legacy	The legacy detection is to identify the valid current signature of the PDs that do not fully follow the IEEE 802.3af/at/bt standard. This protects against damage to the PDs as the right PoE mode is applied.