Τα καλάθι αγορών σας είναι άδειο!
Συνδεθείτε ή δημιουργήστε έναν λογαριασμό.
 CND-300x300.jpg "1111")
 csb-300x300.jpg "1111")
 engenius-300x300.jpg "1111")
 planet-300x300.jpg "1111")
 powerwalker-300x300.jpg "1111")
 pulsar-300x300.jpg "1111")
An outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+
Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.
netPower 16P – a simple solution for complicated tasks Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers, masts and poles with hose clamps.
netPower 16P has a non-blocking throughput of 36 Gbps, switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.
| CPU | 98DX226S, 800 MHz |
| CPU temperature monitor | Yes |
| Memory | RAM:256 MB Flash for storage: 16 MB |
| Switch chip model | 98DX226S |
| Number of 1G Ethernet ports | 16 |
| Number of 10G SFP+ ports | 2 |
| Operating system | SwOS / RouterOS (Dual boot) |
| RouterOS license level | 5 |
| PoE in | Ports 1 - 14 and 16 |
| PoE out | On Ether15 |
| Supported input voltage | 18 - 57 V (DC jack); 36 - 57 V (PoE-in) |
| Number of DC jacks | 1 ( power adapter not included) |
| Dimensions | 303 x 212 x 78 mm |
| Operating temperature | -40°C to +70°C tested |
| Max power consumption | 29 W |
| PoE-out | 802.3af/at |
| PoE-out ports | Ether1 - Ether16 |
| Max out per port output (input < 30 V) | 1.1 A |
| Max out per port output (input > 30 V) | 0.6 A |
| Max total out (A) | The total output power limit will also depend on your power supply max current limit. You should not exceed your power supply current limit or the board may reboot |
| Number of DC jacks | 2 |
| Supported input voltage | 18 - 57 V |
| Max power consumption | 316 W |
| Max power consumption without attachments | 16 W |
