APC Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 32A, 230V, (21) C13 & (3) C19

AP8653 Features

Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 32A, 230V, (21) C13 & (3) C19

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Includes : CAN Port Terminator , Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable

• Metering-by-Outlet capability
  Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.

Metered-by-Outlet with Switching Rack PDU Features & Benefits

Output

• Nominal Output Voltage
  230V
• Overload Protection
  Yes
• Maximum Total Current Draw
  32
• Output Connections
  (21) IEC 320 C13 (Battery Backup)

  (3) IEC 320 C19 (Battery Backup)

Input

• Nominal Input Voltage
  200V , 208V , 230V
• Input frequency
  50/60 Hz
• Input Connections
  IEC 309 32A 2P+E
• Cord Length
  3 meters
• Acceptable Input Voltage
  220-240 VAC
• Number of Power Cords
  1
• Maximum Input Current
  32 A
• Maximum Line Current
  32 A

Physical

• Maximum Height
  1829 , 182.9 CM
• Maximum Width
  56 , 5.6 CM
• Maximum Depth
  51 , 5.1 CM
• Net Weight
  8.23 KG
• Shipping weight
  10.5 KG
• Shipping Height
  2038 , 203.8 CM
• Shipping Width
  162 , 16.2 CM
• Shipping Depth
  118 , 11.8 CM
• Color
  Black
• Units per Pallet
  48.0

Environmental

• Operating Environment
  -5 - 45 °C
• Operating Relative Humidity
  5 - 95 %
• Operating Elevation
  0-3000 meters
• Storage Temperature
  -25 - 65 °C
• Storage Relative Humidity
  5 - 95 %
• Storage Elevation
  0-15000 meters

Conformance

• Approvals
  EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, VDE
• Standard warranty
  2 years repair or replace

Sustainable Offer Status

• RoHS
  Compliant
• REACH
  REACH: Contains No SVHCs
• Battery Directive
  Compliant
• Battery Notes
  ts_Battery_Notes